Hobby-Lobby
WATERPROOF ESC WITH REVERSE: 4.8-12V
Pro Boat's new waterproof marine electronic speed control is definitely ..." />
Waterproof ESC with Reverse | 4.8-12V |
Waterproof ESC with Reverse | 4.8-12V Highlights |
Waterproof ESC with Reverse | 4.8-12V Specs |
Forward | yes |
Reverse | yes |
Continuous Maximum Current | 40 amps |
Input Connector Types | Tamiya |
Output Connector Types | Bullet |
Motor Limit | 15 turns |
Length | 47mm |
Width | 42mm |
Height | 13mm |
Weight | 89 g |
BEC Voltage | 6.0VDC 1 amp. Max. |
PWM Frequency | 1000 Hz. |
Full On Resistance | 0.070 ohms |
Reverse operation for more maneuverability, Technical Specifications:, Input Voltage:, 4-10 cells (4.8-12 V),
Pro Boat's new waterproof marine electronic speed control is definitely ...Hobby-Lobby
TAMIYA/DEANS ULTRA CHARGE ADAPTOR
Pro Boat Tamiya / ..." />
,
Tamiya / Deans Charge Adapter by Pro Boat Tamiya / ...Hobby-Lobby
7.2V 5100MAH NIMH BATTERY W/DEANS
Pro Boat's 7.2V 5100mAh ..." />
7.2V 5100mAh NiMH Battery w/Deans Connector Highlights:, 5100mAh capacity for extreme run times,
7.2V 3600mAh Battery with Deans Connector Pro Boat's 7.2V 5100mAh ...Hobby-Lobby
7.2V 5100MAH NIMH BATTERY W/DEANS
Pro Boat's 7.2V 5100mAh NiMH ..." />
7.2V 5100mAh NiMH Battery w/Deans Connector Highlights:, 5100mAh capacity for extreme run times,
7.2V 5100mAh NiMH Battery w/Deans Pro Boat's 7.2V 5100mAh NiMH ...RCTimer
HOBBYWING LED PROGRAM CARD FOR RC BOAT BRUSHLESS ESC (VERSION2)
Brand | Hobbywing |
Unit | Pcs |
Weight | 0.050 kg |
Features | Version 2 |
TotalRate | var stari_1 = new star5('si_1');stari_1.initial();stari_1.redraw(0); Review Summary |
Write a Review 1.1 Size | Â 88mm (L) * 58mm (W) * 14mm (H) |
1.2 Weight | Â Â 40g. |
Score : 8, 1.3 Input Voltage:  4.8-6V (If the ESC hasn’t a built-in BEC, you must use an additional battery pack to supply the program card)   2  Programmable Items  , C)  The programmable items of LED_PC2C  (Available for XERUN and EZRUN series car ESC of Version2)  #1    Running Mode #2    Drag Brake Force #3    Low Voltage Cut-Off Threshold #4    Start Mode #5    Maximum Brake Force #6    Maximum Reverse Force #7    Initial Brake Force #8    Throttle Neutral Range #9    Timing #10  Over-Heat Protection #11    Motor Rotation #12    Lipo Cells (Note: The item #11 and #12 are not available for XERUN series ESC of Version 2, they only available for EZRUN series ESC)   ,         Front Panel Picture of LED_PC2C:,
 This program card is used to set the programmable ...HobbyKing
SEA FIRE BRUSHLESS TWIN-HULL R/C BOAT (662MM) PLUG-N-DRIVE
Length | 662mm (26.06in) |
Beam | 335mm (8.25in) |
Weight | 1500g |
Motor | B3656 size Watercooled brusless |
ESC | 50A watercooled |
Drive system | Direct drive |
Warning:, this is a very fast boat.,
This thing is fast! Not for small ponds or pilots ...5 Reviews
HobbyKing
EAGLE TREE VIDEO OSD PRO EXPANDER
http | //www.eagletreesystems.com/OSD/OSD-pro.htm |
Here are some examples:, GPS Parameters (Distance to Home, Home Arrow, GPS Altitude, Ground Speed,Course, and more),
An exciting and creative way to include data in your ...5 Reviews
HobbyKing
HORNET FORMULA-1 TUNNEL HULL WITH 540 OUTBOARD MOTOR R/C RACING BOAT (750MM)
Length | 750mm |
Width | 280mm |
Height | 200mm |
Motor | 2858-1400kv Brushless outboard motor |
ESC | 50A |
Servo | 1 x standard size servo |
Battery | 2~3S 4000mah to 5000 lipo battery (Not included) |
Battery | 2~3S 4000mah to 5000 lipo battery (Not included) |
The large 1:10 scale Hornet Racing Boat has a stunning tunnelhull design and runs a large 540 outboard motor. Included is a waterproof ESC as well as a high speed servo for fast response. The 540 motor also controls the direction of the boat making it turn quickly without losing speed. The boat is constructed with fiberglass and immaculately painted and finished in a high-gloss gel-coat for improved glide and a glass finish!,
You just need a 2~3S lipo and your own RX ...5 Reviews
HobbyKing
HOBBYKING VANQUISH BRUSHLESS V-HULL R/C BOAT - 1075MM (KIT)
Length | 1075mm |
Width | 310mm |
Height | 120mm |
Weight | 2780g |
Drive system | 4mm |
Motor:, 36xx size ~2200kv Brushless inrunner with a 5mm shaft (required), ESC:, 180A water cooled (required), Note:, Spare parts are available for this boat.,
The Vanquish is a large (1.075mtr) V-Hull fiberglass racing boat ...5 Reviews
R2Hobbies
RC BOAT Φ4MM*Φ5.3MM*3.5MM*3.5MM*62MM(L) DRIVE SHAFT WITH POSTIVE SCREW (SQUARE)
Product Name | RC Boat Φ4mm*Φ5.3mm*3.5mm*3.5mm*62mm(L) Drive Shaft with Postive Screw (Square) Length |
Dia-A | 4mm |
Dia-B | 5.3mm |
Thread Size | 2.8mm |
Drive Shaft Dimension | 3.5*3.5*65mm |
Gross Weight | 15g |
Net Weight: 5g,
Product ID: rcbp1837023 Product Name: RC Boat Φ4mm*Φ5.3mm*3.5mm*3.5mm*65mm(L) Drive Shaft ...LowPriceRC
FEIYU TECH FLIGHT STABILIZATION SYSTEM PRO
FY-90Q PRO controller is specially designed for QuadCopter use. The Attitude Flight Stabilization System (AFSS), which is an integrated 3-axis gyroscope and 3-axis accelerometer. AFSS forms a comprehensive inertial based navigation platform that calculated 3D flight attitude using proprietary FeiYu Tech algorithm. ,
1551 Feiyu Tech Flight Stabilization System Pro Model Number: FY-90QPRO ...NitroTek
1/16TH BULLDOG SMOKING RC TANK - PRO VERSION
480mm | |
220mm | |
180mm | |
32 | |
30 min's | |
7.2v | |
- ,
- ,
- Metal gearbox ,
- Metal wheels ,
- Metal tracks ,
- Rechargeable battery 7.2v 1700m ,
- Real smoking exhaust ,
- Fires BB’s up to 25m ,
- 40 BB capacity ,
- Realistic sounds ,
- Multi speed forward & reverse ,
- Independent suspension ,
NitroTek
MIGHTY 1/8TH SCALE NITRO POWERED PRO RC TRUGGY
195mm | |
570mm | |
440mm | |
355mm | |
370mm | |
40mm | |
13.1 | |
3950g | |
2 channel |
- ,
- ,
- New C-hub steering; ,
- Newly developed suspension; ,
- Twin adjustable rear suspension; ,
- Lightweight ultra-compact gear box; ,
- Solid aluminum chassis; ,
- Quicker steering and fast response; ,
- 16mm super big bore oil shocks; ,
- New gear ratio; ,
- Easy maintenance pinion gearbox; ,
- All Steel Gear; ,
- Adjustable Sway bar ball cups (Pro only); ,
- High-downforce wing; ,
The stunning ACME Mighty is a fully built, fully featured, ...
NitroTek
WEREWOLF 1/8 BRUSHLESS ELECTRIC RC BUGGY - PRO VERSION
185mm | |
505mm | |
310mm | |
315~320mm | |
310mm | |
30mm | |
3000g | |
2.4Ghz Pistol Type | |
11.1V Li-Po With Charger | |
Brushless with ESC | |
1 |
- ,
- ,
- 1/8 Scale brushless powered radio control car ,
- Extreme High Speeds ,
- 2.4G Radio Equipment ,
- 4WD Shaft drive system ,
- 3 diff. shaft drive 4WD ,
- 2.5mm aluminium chassis ,
- 3mm F/R Alum. shock tower; ,
- High-torque metal geared steering servo ,
- Front universal drive shafts (pro version) ,
- All linkages set with adjustable turnbuckles ,
- Option for four disc brake system ,
- Brushless motor, brushless ESC ,
- Li-Po battery and balanced charger ,
- Plus many more. See below images for rest of features. ,
NitroTek
WARRIOR 4WD BUGGY- PRO VERSION WITH REMOTE STARTER
185mm | |
505mm | |
310mm | |
315~320mm | |
310mm | |
30mm | |
3300g | |
2 channel |
- ,
A remote start upgrade is available as an option.
, ,- ,
- New C-hub steering; ,
- Newly developed suspension; ,
- Twin adjustable rear suspension; ,
- Four wheel drive ,
- Lightweight ultra-compact gear box; ,
- Solid aluminum chassis; ,
- Width of only 129mm; ,
- Quicker steering and fast response; ,
- 16mm super big bore oil shocks; ,
- New gear ratio; ,
- Easy maintenance pinion gearbox; ,
- All Steel Gear; ,
- Adjustable Sway bar ball cups (Pro only); ,
- Adjustable high-downforce wing; ,
The Warrior is a fully built, fully featured, race ready, ...